PRESENTATION
ARTICLES ENGLISH
The
timber bolted connection
Safety factor of
timber bolted connection designed with PPKI
SNI-5 (2002)
This paper study the safety factor of timber connection
designed with PPKI SNI-5 (2002). johansen yield model is used to evaluate the
nominal design value of single bolted connection. Double-shear bolted
connection, with the side members and the main member from wood, is chosen for
this study. A comparison study of safety factor between SNI-5 (2002) and NDS
for timber construction of U.S (1997) is
also conducted. Finally, the safety
factor is analyzed for both directions parallel and perpendicular to
wood grain of four possible yield modes. from the study , both SNI-5 (2002) and
NDS (1997) use higher safety factor for bolted connection sustaining load
parallel to grain. smaller safety factor is used in both codes when the plastic
hinge of bolt is created such as the yield modes IIIs and IV however,in this
case, the safety factor of NDS is significantly much higher than that of SNI-5 (2002)
keywords :
bolted connection,yield mode, and safety factor
author : ali
awaludin
NOMINAL
AND VERBAL SENTENCE
NOMINAL
the safety
factor of NDS is significantly much higher than that of SNI-5 (2002)
VERBAL
johansen
yield model is used to evaluate the nominal design value of
single bolted connection
the side
members and the main member from wood, is chosen for this study.
the
safety factor is analyzed
for both directions parallel and perpendicular to wood grain of four possible
yield modes
TENSES
SIMPLE PAST
TENSE
1(+) Johansen
yield model is used to evaluate the nominal design value of
single bolted connection
(- )Johansen
yield model is did not use to evaluate the nominal design value
of single bolted connection
(?) Did
johansen yield model is use to evaluate the nominal design value of single
bolted connection ?
2.+ The
safety factor is analyzed for
both directions parallel and perpendicular to wood grain of four possible yield
modes
-The
safety factor is did not analys for both
directions parallel and perpendicular to wood grain of four possible yield modes
? Did
the safety factor is analys for both directions parallel and
perpendicular to wood grain of four
possible yield modes ?
Aktif
– Pasif , Pasif - Aktif
Pasif
Johansen
yield model is used to evaluate the nominal design value of
single bolted connection
Tahanan
lateral sambungan baut dianalisis berdasarkan teori model kelelehan yang di
usulkan oleh Johansen
Aktif
The nominal
design value of single bolted connection yield model is use by johansen
5W+1H
What do you
think about this article ?
Ans : This
article explain how the safety standard
of bolted connection
Who
author this article ?
Ans : The
author is ali awaludin
Where did
the safety factor in this article?
Ans : Has passed the standard
test and safe when used
Why did
the bolted connection must
be indonesia standard ?
Ans : Because
must be safe and be able guarantee
the safety of many people
When Was
analyzed of the timbre bolted is begin ?
Ans : The
timber connection analyze in 2002
How the
safety factor of timbre bolted connection is
design ?
Ans : Design with SNI , good quality , safe and durable
The
Reason
The article
is simple past tense, Because author write the article are duraction in the
past.